|
< CLICK HERE for additional information on
this alloy >
5000 rod can be used to weld a variety
of ductile, nodular and malleable cast irons
to themselves or for joining cast irons to steel.
It produces a dense, moderately hard,
crack-resistant weld that requires carbidetipped
tools for machining. This electrode is
recommended when the post weld deposit
does not need machining. Containing
approximately 60% nickel, this rod is
ideally suited for the repair of meehanite
dies. Note, the flux coating on this rod
does NOT contain barium, reducing
hazardous fumes.
Welding Current
AC - DCEP
Typical Wire Chemistry
*Proprietary*
Typical Mechanical Properties
(As Welded)
Yield Strength, ksi 49
Tensile Strength, ksi 70
Elongation%, min 20
Brinell hardness180
Rockwell B hardness 88 - 90
Welding Positions
F,V,OH,H
Available Diameters and suggested
Operating Range in Amps
3/32" 50 - 80
1/8" 70 - 110
5/32" 100 - 140
3/16" 130 - 175
< CLICK HERE for additional information on
this alloy >
|
