|
< CLICK HERE for additional information on
this alloy >
ER316/316L is used for welding types 316
and 316L stainless steels. It has a maximum
carbon content of .03% to reduce the
possibility of formation of intergranular
carbide precipitation. This low carbon alloy
is not as strong as 316H at elevated
temperatures. This filler metal is primarily
used for welding low carbon molybdenum
bearing austenitic alloys.
AWS Specification
AWS A5.9/A5.9M:2006
AWS Classification
ER316
ER316L
Welding Current
DCEP
Typical Wire Chemistry
C 0.08
Cr 18.0 - 20.0
Ni 11.0 - 14.0
Mo 2.0 - 3.0
Mn 1.0 - 2.5
Si 0.30 - 0.65
P 0.03
S 0.03
Cu 0.75
Typical Mechanical Properties
(As Welded)
Yield Strength, ksi 58
Tensile Strength, ksi 86
Elongation%, min, 36
Welding Positions
F,V,OH,H
Available Diameters MIG with
Operating Range in Amps
.023" 35 - 70
.030" 50 - 100
.035" 160 - 210
.045" 180 - 250
Available Diameters TIG with
Operating Range in Amps
.035" 60 - 90
.045" 80 - 110
1/16" 90 - 130
3/32" 120 - 175
1/8" 150 - 220
5/32" 170 - 350
< CLICK HERE for additional information on
this alloy >
|
