< CLICK HERE for additional information on this alloy >

ER410 is used to weld types 403, 405,
410, and 416 grades of stainless. It is also
commonly used for welding overlay on carbon
steels to resist corrosion, erosion, or abrasion.
Because this is an air hardening type of
material the joint to be welded should be
preheated to 350ºF.

AWS Specification
AWS A5.9/A5.9M:2006
AWS Classification ER410

Welding Current

DCEP

Typical Wire Chemistry
C 0.12
Cr 11.5 - 13.5
Ni 0.6
Mo 0.75
Mn 0.6
Si 0.5
P 0.03
S 0.03
Cu 0.75

Typical Mechanical Properties
(As Welded post heat treatment
between 1350º and 1400ºF for
one hour)
Yield Strength, ksi 78
Tensile Strength, ksi 89
Elongation%, min 24

Welding Positions

F,V,OH,H

Available Diameters MIG with
Operating Range in Amps
.030" 50 - 100
.035" 160 - 210
.045" 180 - 250

Available Diameters TIG with
Operating Range in Amps
.035" 60 - 90
.045" 80 - 110
1/16" 90 - 130
3/32" 120 - 175
1/8" 150 - 220
5/32" 170 - 350