Welding Material Sales, Inc. - Your Source for Welding ConsumablesWelding Material Sales, Inc. - Your Source for Welding ConsumablesWelding Material Sales, Inc. - Your Source for Welding Consumables
About WMS
Products
MSDS
CERTS
Dealer LoginDistributors
AssociatesWhy WMS?
Contact Us
Empty Spool Guarantee
Empty Spool Guarantee

 

Products >> A5.19, MAGNESIUM ALLOY Bare Electrodes and Welding Rods

 

ERAZ61A

< CLICK HERE for additional information on this alloy >

 

ERAZ61A magnesium welding alloy is a good
choice when welding magnesium base metals
of similar chemical composition. It produces
superior joints with the maximum tensile
strengths offered by these alloys. Cleanliness
of both the filler metal and base metal is extremely
important when welding with magnesium.
Flux is NOT required for TIG or MIG
welding processes of ERAZ61A magnesium
alloy. Although Oxy-acetylene welding of this
alloy is uncommon it can be done and should
be limited to single-pass welding on thin
gauge magnesium materials.


AWS Specification

ANSi/AWS A5.19-92 (R2006)
AWS Classification ERAZ61A


Welding Current

GTAW - AC/DCEP
GMAW - DCEP


Typical Wire Chemistry
Al 5.8 - 7.2
Be 0.0002 - 0.0008
Mn 0.15 - 0.5
Zn 0.40 - 1.5
Cu 0.05
Fe 0.005
Ni 0.005
Si 0.05
Mg REM
OTHER 0.30


Typical Mechanical Properties

(As Welded)
Yield Strength, ksi 30
Tensile Strength, ksi 44
Elongation%, min 16
Brinell Hardness 60
Melting Point °F 1140


Available diameters MIG and
suggested Operating Range in Amps

.040" 25 - 50
1/16" 70 - 175
3/32" 115 - 210


Available Diameters TIG and
suggested Operating Range in Amps

3/32" 35 - 125
1/8" 160
5/32" 175

 

< CLICK HERE for additional information on this alloy >

 

 

Products >> A5.19, MAGNESIUM ALLOY Bare Electrodes and Welding Rods

 

About WMS | Products | SDS | CERTS | Distributors | Find a Dealer | Associates | Contact Us | Legal Notice | Home
Copyright © 2015 Welding Material Sales, Inc.