|
< CLICK HERE for additional information on
this alloy >
R60 is a Moly alloyed, high strength,
oxy-acetylene gas welding rod used for gas
brazing of low carbon and low alloy steels.
It is used in applications where a high tensile
strength is needed. The high Silicon and
Manganese content in the product eliminates
the need for flux when welding. A neutral
flame should be used.
Typical Applications
• Low carbon and low alloy steels
• Sheets, plates, pipes
• Structural shapes
AWS Specification
ASW A5.2/A5.2M:2007
AWS Classification R60
Typical Wire Chemistry
C 0.15
Mn 0.90 - 1.40
Si 0.10 - 0.35
P 0.035
S 0.035
Cu 0.30
Cr 0.20
Ni 0.30
Mo 0.20
Al 0.02
Typical Mechanical Properties
(As Welded)
Yield Strength, ksi 42
Tensile Strength, ksi 60
Elongation%, min 20
Available Diameters
1/16", 3/32", 1/8" & 5/32"
< CLICK HERE for additional information on
this alloy >
|
